FS700

FS700 is a waterborne, single pack acrylic based sealer used to form linear gap seals where gaps are present in floor and wall constructions.

The product is designed to be used in conjunction with a light weight mineral fibre material to form a fire seal at the junction between floor slab and head of wall. The intended use of system FS700 is to reinstate the fire resistance performance of gaps in and joints between joints in rigid floor and wall constructions.

Benefits 

• Tested up to 3 hours
• Reaction to fire Class E
• Accommodates movement up to 12½%
• Acoustics up to 33 dB
• Provides a fire, acoustic, smoke between floor slab or head of wall movement joint.
• Waterborne single pack system

Water-Based Intumescent Acrylic Sealant

Fire Rating: 240 Minutes

FS702 cures to give a firm but flexible fire seal. Suitable for use in various construction movement joints up to 15%, whilst providing an excellent acoustic and air seal. FS702 is ideally suited for use around small annular service penetration seals in walls and floors.

Benefits

• Ideal for sealing low movement joints – suitable for gaps up to 50 mm wide
• Suitable for rigid and flexible walls
• Acoustics up to 61 dB
• Air seal up to 2,000 Pa
• Single sided seal tested
• Easily paintable

Intumescent Sealant

FS709 is designed to close off gaps and penetrations in compartment walls and floors, to provide up to 4 hours fire resistance. This product has been formulated to close off plastic pipe penetrations in the event of a fire, negating the need for pipe closers or wrap systems.

Benefits

• Certified to the latest European standards
• A+ internal air quality rating
• Tested with combustible pipes up to 125 mm
• Tested for use in linear gaps up to 25 mm
• Tested with metallic pipes, cables, cable bunches, cable trays and cable ladders

Neutral Cure, Fire Rated Silicone

FS703 Silicone Sealant is a single-part alkoxy-based fire resistant, elastomeric, neutral cure silicone sealant. Provides up to 4 hours fire protection at internal and external building gaps and movement joints.

FS703 is designed for sealing joints in compartment walls and floors, Gaps between frames and structures, at junctions of different materials.